$ Applied for purchase:
$ € £
$ Applied for purchase:
($)
Support Topics

Products


American Probe and Technologies offers a complete line of low current probes and test accessories to provide a Turn-Key system solution for your analytical test requirements.

APT has built its success on high quality products tested at our facility to meet or exceed the specifications requested. We have a complete test and measurement laboratory and can provide a certificate of compliance.

 Prev
1 2 3 4 5 6 7
Next 
Sort by Popularity
15 Per Page
74A-6000
74A DC Probe Holder
$75.00
Features Direct replacement for Micromanipulator probe holder. Specifications Mounting Shank diameter 0.040". See also 74B-1, 74JA
Select options
76LPC-SSMC/40 shown
76LPC-SSMC-B Coaxial Patch Cable
$165.00
Features Low noise coaxial patch cable.  Constructed with custom low noise RG188LN coax ial  cable, and terminated with RT angle SSMC...
Select options
Turn-Key Probe Card Test Solution
Turn-Key Probe Card Test Solution
Contact us for a price
Features Leakage and capacitance characterization of blank or populated probe cards. Designed for Agilent 4070 Series or Keithley S600 cards....
74B-1 DC Probe Holder
74B-1 DC Probe Holder
$95.00
Features Accepts most 10-20 mil diameter shanks of probes. APT offers a wide variety of lengths and bends to meet your application (*bends...
Select options
71G Gold Plated Probe
71G Gold Plated Tungsten Probe
$17.00
10 mil tungsten probe, gold plated for reduced contact resistance. Note: All prices are EACH PROBE, NOT PER BOX Sold in boxes of  10, 20, or 25....

Minimum quantity for "71G Gold Plated Tungsten Probe" is 50.

Select options
Shown mounted into 74CJA Holder (optional)
72SPP Series Spring Pogo Probe
$3.25
Pogo Pin with 12MM length and 0.193" OD, Rhodium plated steel plunger probe contact. 1.5-1.7 oz spring force
+ −

Minimum quantity for "72SPP Series Spring Pogo Probe" is 20.

AW-7000 Ambient Wirebonding Workholder
AW7000 Series Ambient Wirebonding Workholders
$1,695.00



+ −
74J-SAI DC Probe Holder
74J-SAI DC Probe Holder
$75.00
Features Designed for Alessi probe holders. Accepts pre-bent or straight probes. Specifications Shank dimensions: .078" X 4.5" long. Pin...
+ −
74B-1K DC Probe Holder
74B-1K DC Probe Holder
$355.00
Don't need the expensive Kelvin probes? This is an inexpensive way to use the 4 wire Kelvin connector on your Keithley Microvolt DVM. The Kelvin...
+ −
74JA-BT (straight version shown)
74JA-BT Triaxial Probe Holder
$475.00
The triaxial probe holder with custom bends and optional piviot mount, (stright version shown on American Probe & Technologies LP600...
+ −
74J-SC Probe Holder
74J-SC - Straight Coax Probe Holder
$325.00
The straight coaxial probe holder, can but ordered in custom lengths and optional piviot mount, shown with Micromanipulator 6000...
+ −

Minimum quantity for "74J-SC - Straight Coax Probe Holder" is 1.

74CJ-APT-KS-100GP/50 Probe Holder
74CJ-APT-KS-100GP/50 Probe Holder
$625.00
Features Ground Plane design for higher frequency operation. Ground Plane pitch may be ordered from 100 to 250 um. Specifications...
Select options
86TPC-TBNCL3/40 Triaxial Patch Cable
86TPC-TBNCL3/40 Triaxial Patch Cable
$265.00
Designed for microprobing industry. Shown with yellow cable. Features Triaxial Low Noise Cable with male triaxial BNC connectors on both ends....
+ −
WH5000 Series Heated Wirebonding Workholders
WH5000 Series Heated Wirebonding Workholders
$3,195.00
Mechanical device clamping provides the optimum vibration-free positive hold down required to eliminate fixture related wire bonding problems. Mechanical...
+ −
74A series shown
74JA-BC Coax Probe Holder with custom bends
$375.00
The coaxial probe holder with custom bends and optional piviot mount, shown mounting into an Micromanipulator positioner.  ...
 Prev
1 2 3 4 5 6 7
Next